Real World BricsCAD Case Study – Schrack Seconet Part 4

Real World BricsCAD Case Study – Schrack Seconet Part 4

Bengaluru, India

Guest Post by: Steve Johnson
February 1, 2019
4 min read

Rakesh Rao: When Steve Johnson does his job, it is a thorough affair. In this blog post, we reproduce the fourth installment of his interaction with Martin Harrer and Germar Tishcler of Schrack Seconet. Read below to learn what Stev has to say about in this post.

In this post I continue the interview CAD guy Martin Harrer and IT guy Germar Tischler from Austrian fire alarm, security and communications systems company Schrack Seconet. In this part I ask about LISP, maintenance and support.

See here for Part 1, Part 2 and Part 3.

Third Party Tools

Do you use any third-party or add-on tools not written by yourself?

Martin: No, just OpenDCL for programming.

DOSLib?

Martin: No. DOSLib is great, but I don’t need it because lots of functions are now covered by the LISP engine, or easy to cover. I love OpenDCL. I need it to add to the interface, but it’s very nice to build and maintain it.

Well, I’ll see Owen [Wengerd – custodian of OpenDCL] in London…

Martin: Give him a kiss!

No, I’m not kissing Owen Wengerd!

Martin: Well, a big thank you.

A hug, maybe. I’ll give him a hug.

LISP

Martin: And Torsten [Moses] too. It makes the work so much easier. I thought about using .NET for the user interface. But it’s easier in OpenDCL. Lots of stuff is easier to make in LISP, faster. I’m not very experienced in .NET programming, in C#; I think it’s a nice language but some things in LISP can be done in two or three lines. And I have a very good library of LISP I’ve written over ten years.

What about maintenance of LISP? Do you find you can do nothing, just leave it alone and it works from BricsCAD release to release?

Martin doing his thing

Martin: Yes. I maintain it, but that’s more fixing bugs that I made! But also taking advantage of new features. That’s why we are updating things every day.

Maintenance

So your suite of internal software, you’re maintaining that daily?

Martin: Yes.

Germar: At night we sync it into the branch offices. Then in the morning when they start BricsCAD, if anything has changed it will get updated from the server.

Martin: I set up the updates to happen with every BricsCAD start, but if you have a slow internet connection you can switch it to update on first start in the morning and that’s enough. Unless there’s some very urgent fixes.

I did that one time because I stopped one thing working! I stopped a branch office because I had a bug.

Yes, that’s embarrassing!

Martin: They were grateful, they paid me compliments the next day. With the setup we have, it’s easy to fix.

That’s something I miss in Revit®. From my point of view, it’s very hard to implement custom software in Revit® compared with BricsCAD or AutoCAD®. The command line… we’re used to it! It’s like someone cut off my hands when I work with Revit®.

Support

What’s Bricsys support like? If you put in a support ticket, how long does it take before you get to talk to somebody who understands the problem?

Germar: No time at all, really. Normally you get an answer really, really fast. The only problem we had, and this is our mistake really… We lease our computers and swap them for new ones every three or four years. We would wipe the hard drive and forget to deactivate BricsCAD first. So we used up more licenses than we had and the drives were securely wiped clean with no way of getting the data back.

So that was the first couple of times I needed BricsCAD support. I’d go, “This is the computer, this is the license”, I’d send it to them and I swear it was sorted out within a maximum of a couple of hours.

You can deactivate them manually yourself over the website but we did entire branch offices overnight and then the next day it’s “Ah, oopsie!” but that was our mistake and they helped us out immediately.

All my support experiences have been very good.


In the next part I ask about LISP, maintenance and support.

Ready to try BricsCAD?

Easy to try, easy to buy, easy to own. That’s BricsCAD. Try all of our products, for free for 30 days at www.bricsys.com. Freedom of choice, plus perpetual (permanent) product licenses that work with all languages, in all places. You’ll love what we’ve built for you with the BricsCAD product family.

Steve Johnson

Steve Johnson, owner of cad nauseam, has been a CAD specialist since 1985. His roles have included CAD management, development, consulting and technical writing. Steve has also been a contributing editor for Cadalyst magazine, President of the Western Australian AutoCAD User Group, and a Vice President of CADLock, Inc. He is also an international veteran fencing champion.

Want to know more about DesignSense, BricsCAD?

Key Contacts: rakesh.rao(at)thedesignsense.com / +91-9243438300 / +91-8073279755

Follow us on Twitter: https://www.twitter.com/rakesh_rao

Discover BricsCAD, GeoTools for AutoCAD  & BricsCAD, CADPower for AutoCAD & BricsCAD, Free Lisp @ TechCenter

About Rakesh Rao

Director, DesignSense Software Technologies Private Limited, Bangalore Proprietor: Four Dimension Technologies CAD Developer, Product development, reseller management,