CGTech Releases Force Calibration Software

CGTech Releases Force Calibration Software
0 comments, 28/05/2019, by , in CAM, News

HOVE, UK, May 28, 2019 – To support the use of its physics-based Vericut Force optimization module, CGTech has developed a bespoke software package to help users calibrate the software such that it can replicate the cutting conditions which would be achieved in real-world applications. Force Calibration software was recently unveiled at the University of Sheffield’s Advanced Manufacturing Research Centre (AMRC).



Force Calibration is a software program that enables material calibration for use with Force CNC program optimization (milling or turning) via a material characterization file. The encrypted Force material characterization files used by Vericut’s physics-based Force optimization module depend on cutter material and the material being cut, and are applied to any simulation run to achieve the most efficient NC machining program.

Data for Force material files comes from a series of test cuts on a CNC mill and/or lathe with a dynamometer set up, using a specific cutting tool and the workpiece material to be characterized. Having input details of the material to be cut into the software, plus cutter material and geometry data, milling and turning cutting trials were conducted in the AMRC’s machine shop. Eight-channel Kistler dynamometers fitted to the machine tools measured the actual cutting forces generated throughout the trials.

There are five steps required to capture the data, according to CGTech Vericut product specialist, Pete Haas. “We consider step one as administration and planning, where the raw material and cutting tool are procured along with the determination of the location and actual machine tool to be used,” he says. “Step two includes the design of experiment, NC program creation and set-up instructions.

“Force Calibration comes in for step three, with the set-up of the machine tool and dynamometer, preparation of the stock material, and running the cutting test, with captured data converted for use in the software,” he continues. “With the data loaded into Force Calibration, we can subsequently calibrate the material and validate the results for steps four and five.

“Of course, there is a presumption that the knowledge and experience required to make these final steps work are available. An understanding of cutting tools, tool holders and materials is required, along with the skills to get any information needed. Programming and machining knowledge for NC macros and CNC machine operation, along with the engineering knowledge required to use the dynamometer, will also be necessary.”

Managing director Tony Shrewsbury adds: “Calibration is not for every business – many things can go wrong – experience, training and problem resolution skills are needed. We also appreciate that many engineering companies do not have access to all the hardware required to run a calibration test, so we offer this as a cost-effective technical service.

“Materials only need to be calibrated once and an ISO standard range of over 100 materials is already held in the CGTech materials catalog, which is available to customers upon request. We are adding to these each time we run a new material calibration test.”

The Force module within Vericut uses a physics-based optimization method to determine the maximum reliable feed rate for a given cutting condition based on four factors: force on the cutter, spindle power, maximum chip thickness, and maximum allowable feed rate. Force calculates feed rates by analyzing tool geometry and performance parameters, material properties of the stock and cutting tool, detailed cutting tool edge geometry, and Vericut cut-by-cut contact conditions.

Says Haas: “By far the most powerful and important feature of Force is its understanding of the 3D material removal interaction between arbitrary shaped cutters and workpieces for arbitrary motion in space. The improved cutting and time savings are substantial with the Force optimization module, and would be a great benefit to any company removing material.”

Adds Shrewsbury: “Force is founded on machining fundamentals; it is easy to set up and easy to use once the materials have been characterized. Users can expect to see improvements of up to 50%.

“Advanced manufacturing businesses within the aerospace or medical sectors, for example, should consider Force Calibration for any unique or proprietary materials. It would ensure the material is machined as efficiently as possible and that the details of its characteristics remain in-house.”

About CGTech

CGTech’s VERICUT software is the standard for CNC simulation, verification, optimization, analysis, and additive manufacturing. CGTech also offers programming and simulation software for composites automated fiber-placement, tape-laying, and drilling/fastening CNC machines. VERICUT software is used by companies of different sizes in all industries. Established in 1988, and headquartered in Irvine, California; CGTech has an extensive network of offices and resellers throughout the world. For more information, visit the CGTech website at, call +44 (0)1273 773538, or email

About Guest/blogger

Guest/blogger posts belongs to respective authors. The articles/tips are summarized here, if interested in reading the complete blog post, please follow the links given under each post.
Download Now